Yaskawa CM090 Manuel d'utilisateur télécharger pdf

Yaskawa Electric America, Inc – www.yaskawa.com

IG.AFD.25, Page 1 of 6

Date: 10/7/09, Rev: 09-10

Modbus

TCP/IP Option Kit

CM090



This document applies to the Yaskawa F7U, G7U, P7U, E7U and G5M (Spec F) drives. For G5U(HHP) drives,

refer to IG.G5HHP.25.



Unpack the CM090 Modbus TCP/IP Option kit and verify that all components are present and undamaged.

CM090 Option Kit Parts List Qty.

Modbus TCP/IP Option Card 1

Shielded RJ-45 M-F Cable 1

Ground Wire 1

4”x1” Insulated Tubing 1

Cable Ties 2

Installation Guide (IG.AFD.25) 1



Connect power to the drive and verify that the drive functions correctly. This includes running the drive from the operator keypad. Refer to the appropriate drive technical

manual for information on connecting and operating the drive.



Remove power from the drive and wait for the charge lamp to be completely extinguished. Wait at least five additional minutes for the drive to be completely discharged.

Measure the DC bus voltage and verify that it is at a safe level.



Remove the operator keypad and drive cover.

 Remove the operator keypad.

 Remove the terminal and control covers.

 Remove the option card hold-down by carefully compressing the top and bottom until it becomes free of its holder. Lift it out.



Mount the Modbus TCP/IP Option Card on the drive.

 Connect the RJ-45 M-F cable supplied in the

CM090 kit to the Modbus TCP/IP Option Card.

 Connect the ground cable supplied to ground

terminal J6 on the Modbus TCP/IP Option Card.

 Align the J2 connector on the back of the Modbus

TCP/IP Option Card with its mating 2CN

connector on the drive control card.

 Align the two standoffs on the front of the drive

control board with the two holes on the right side

of the Modbus TCP/IP Option Card.

 Press the Modbus TCP/IP Option Card firmly

onto the drive 2CN connector and standoffs until

the J2 connector is fully seated on 2CN and the

drive standoffs have locked into their appropriate

holes.

 Route the RJ-45 M-F cable and the ground cable

along the left-inside of the drive case.

 Replace the option card hold down.

 Connect the Modbus TCP/IP Option Card ground

wire to the ground terminal on the terminal

assembly.

1 2 3 4 5 6

Résumé du contenu

Page 1 - TCP/IP Option Kit

Yaskawa Electric America, Inc – www.yaskawa.com IG.AFD.25, Page 1 of 6 Date: 10/7/09, Rev: 09-10 Modbus® TCP/IP Option KitCM090 This document applie

Page 2 - Date: 10/7/09, Rev: 09-10

Yaskawa Electric America, Inc – www.yaskawa.com IG.AFD.25, Page 2 of 6 Date: 10/7/09, Rev: 09-10  Apply power to the drive and verify that the dri

Page 3 - Subnet mask: 255.255.255.0

Yaskawa Electric America, Inc – www.yaskawa.com IG.AFD.25, Page 3 of 6 Date: 10/7/09, Rev: 09-10  Resetting the Modbus T

Page 4 - IG.AFD.25, Page 4 of 6

Yaskawa Electric America, Inc – www.yaskawa.com IG.AFD.25, Page 4 of 6 Date: 10/7/09, Rev: 09-10  Configure the Modbus TCP/IP Option Card.  Sele

Page 5 - IG.AFD.25, Page 5 of 6

Yaskawa Electric America, Inc – www.yaskawa.com IG.AFD.25, Page 5 of 6 Date: 10/7/09, Rev: 09-10  Finish the Modbus TCP/IP Option Card installation.

Page 6

Yaskawa Electric America, Inc – www.yaskawa.com IG.AFD.25, Page 6 of 6 Date: 10/7/09, Rev: 09-10 Modbus® TCP/IP Option KitCM090Copies of this Instal

Plus de documents pour Équipement YASKAWA CM090

Voir le document Yaskawa CM090 Manuel d'utilisateur

Yaskawa CM090 Manuel d'utilisateur (9 pages)

Commentaires sur ces manuels

Pas de commentaire

Yaskawa CM090 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Yaskawa CM090. Yaskawa CM090 User Manual Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Équipement YASKAWA CM090

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Yaskawa CM090