YASKAWA Varispeed G7 Manuel d'utilisateur télécharger pdf (Page 38)

8 APPENDIX

8.1 List of Command Code Registers

8.1.1 Command Data (Read and Write)

Command Code Description Drive

Read Write BIT F7 G7

1000H - Reserved Complete Yes Yes

Run Cmd Yes Yes

0 Forward / Stop Command 1: Run 0: Stop Yes Yes

1 Reverse / Stop Command 1: Run 0: Stop Yes Yes

2 External Fault 1: Fault (EF0) Yes Yes

3 Fault Reset 1: Reset Command Yes Yes

4 Comnet Yes Yes

5 Comctrl Yes Yes

6 Multi-Function Input Command 3 (Terminal S3) Yes Yes

7 Multi-Function Input Command 4 (Terminal S4) Yes Yes

8 Multi-Function Input Command 5 (Terminal S5) Yes Yes

9 Multi-Function Input Command 6 (Terminal S6) Yes Yes

A Multi-Function Input Command 7 (Terminal S7) Yes Yes

B Multi-Function Input Command 8 (Terminal S8) No Yes

C Multi-Function Input Command 9 (Terminal S9) No Yes

D Multi-Function Input Command 10 (Terminal S10) No Yes

E Multi-Function Input Command 11 (Terminal S11) No Yes

1001H -

F Multi-Function Input Command 12 (Terminal S12) - -

1002H - Frequency Reference (set the units displayed with parameter o1-03) Yes Yes

1003H

Not Used - -

1004H

- Not Used No Yes

1005H

- Not Used No Yes

1006H

- PID Desired Value Yes Yes

1007H - Analog Output 1 Setting (-11V/-1540~11V/1540: Enabled when H4-01 is set to “31”) Yes Yes

1008H - Analog Output 2 Setting (-11V/-1540~11V/1540: Enabled when H4-04 is set to “31”) Yes Yes

Multi-Function Output Setting Yes Yes

0 Relay Output (Terminal M1-M2) 1: ON 0: OFF Yes Yes

1 PHC1 (Terminal P1-PC) 1: ON 0: OFF Yes Yes

2 PHC2 (Terminal P2-PC) 1: ON 0: OFF Yes Yes

3 PHC3 (Terminal P3-C3) 1: ON 0: OFF No Yes

4 PHC4 (Terminal P4-C4) 1: ON 0: OFF No Yes

5 Not Used

6 Fault Relay (Terminal MA-MC) Output. Determined by bit-7: 1: ON, 0:

OFF.

Yes Yes

7 Fault Relay (Terminal MA-MC) 1: ON 0: OFF Yes Yes

1009H -

8-F Not Used Yes Yes

100AH-

100EH

200AH

200EH

Not Used - -

Command Selection Setting Yes Yes

0 Not Used Yes Yes

1 PID Desired Value Input 1: Enabled 0: Disabled Yes Yes

2-B Not Used Yes Yes

C 1: Batch Data Transfer Terminal S5 Input 1: Enabled 0: Disabled Yes Yes

D 1: Batch Data Transfer Terminal S6 Input 1: Enabled 0: Disabled Yes Yes

E 1: Batch Data Transfer Terminal S7 Input 1: Enabled 0: Disabled Yes Yes

100FH -

F Not Used - -

NOTE: Any bit that is not used will be written as “0” when saving data to the Command Code.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 56 57

Commentaires sur ces manuels

Pas de commentaire

YASKAWA Varispeed G7 Manuel d'utilisateur Page 38

Commentaires sur ces manuels

Produits connexes et manuels pour Adaptateurs et onduleurs de puissance YASKAWA Varispeed G7