YASKAWA VS-606V7 Series Manuel d'instructions télécharger pdf (Page 54)

*When “deceleration to a stop” is selected (n005=0).

By setting “Multifunction Input Selection” (either of n050 to n056) to “11 (accel/decel

time select)”, accel/decel time is selected by turning ON/OFF the accel/decel time

select (terminal S1 to S7).

At OFF : n019 (accel time 1)

n020 (decel time 1)

At ON : n021 (accel time 2)

n022 (decel time 2)

Adjusting frequency upper and lower limits

• Frequency reference upper limit (n033)

Sets the upper limit of the frequency

reference in units of 1%.

(n011: Maximum output frequency = 100%)

Factory setting: 100%

• Frequency reference lower limit (n034)

Sets the lower limit of the frequency

reference in units of 1%.

(n011: Maximum output frequency = 100%)

When operating at frequency reference 0,

operation is continued at the frequency

reference lower limit.

However, when frequency reference lower

limit is set to less than the minimum output

frequency (n016), operation is not performed.

Factory setting: 0%

Using two accel/decel times

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 173 174

Pas de commentaire

YASKAWA VS-606V7 Series Manuel d'instructions Page 54