Yaskawa Modbus TCP/IP Installation Manuel d'utilisateur télécharger pdf (Page 19)

5 Installation Procedure

YASKAWA ELECTRIC TOBP C730600 57B 1000-Series Option SI-EM3 Installation Manual 19

3. Make sure the screws on the left and right sides of the option terminal block (J) are

tightened with a tightening torque of 0.5 to 0.6 Nxm (4.4 to 5.3 in lbs), then insert the

option (B) into the CN5-A connector (L) located on the drive and fasten it using one

of the included screws (H).

Figure 5

Figure 5 Insert the Option

A1000

Modbus_IM_E_conditional.fm 19 ページ２０１２年１１月５日　月曜日　午後４時３２分

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 50 51

Pas de commentaire

Yaskawa Modbus TCP/IP Installation Manuel d'utilisateur Page 19