Yaskawa Modbus TCP/IP SI-EM3D/V Manuel d'utilisateur télécharger pdf (Page 9)

2 Product Overview

About this Product

This option provides a communications connection between the drive and a Modbus TCP/IP

network. The option connects the drive to a Modbus TCP/IP network and facilitates the

exchange of data.

This manual explains the handling, installation and specifications of this product.

The option is a communications link to connect industrial devices (such as smart motor

controllers, operator interfaces, and variable frequency drives) as well as control devices (such

as programmable controllers and computers) to a network. The option is a simple, networking

solution that reduces the cost and time to wire and install factory automation devices, while

providing interchangeability of like components from multiple vendors.

By installing the option to a drive, it is possible to do the following from a Modbus TCP/IP

master device:

• Operate the drive

• Monitor drive status

• Change drive parameter settings.

Applicable Models

The option can be used with the drive models in Table 1.

Table 1 Applicable Models

Drive Series

Drive Model Number

Software Version

<1>

V1000

CIMR-VooAoooo

1012 and later

<1> See “PRG” on the drive nameplate for the software version number.

2 Product Overview

YASKAWA TOEP YAICOM 17A V1000 Option Dual-Port Modbus TCP/IP SI-EM3D/V Installation Manual

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 55 56

Pas de commentaire

Yaskawa Modbus TCP/IP SI-EM3D/V Manuel d'utilisateur Page 9