Yaskawa CM071 Manuel d'utilisateur télécharger pdf

Yaskawa Electric America, Inc – www.yaskawa.com

IG.AFD.17, Page 1 of 4

Date: 11/17/06, Rev: 06-11

Modbus

Plus Option Kit

CM071



This document applies to the Yaskawa F7U, G7U, P7U, E7U, G5M(Spec F), and G5M(600V) drives. For

G5U(HHP) drives, refer to IG.G5HHP.17.



Unpack the CM071 Modbus Plus Option Card and verify that all components are present and undamaged.

CM071 Option Kit Parts List Qty.

Modbus Plus Option Card (46S03364-0010 or UTC000063) 1

Installation Guide (IG.AFD.17) 1



Connect power to the drive and verify that the drive functions correctly. This includes running the drive from the operator keypad. Refer to the

appropriate drive technical manual for information on connecting and operating the drive.



Remove power from the drive and wait for the charge lamp to be completely extinguished. Wait at least five additional minutes for the drive to be

completely discharged. Measure the DC bus voltage and verify that it is at a safe level.



Remove the operator keypad and drive cover.

 Remove the operator keypad.



Remove any and all covers necessary to expose the drive terminal

assembly and control board. Refer to the appropriate drive

documentation for information on removing drive covers.



Remove the option card hold-down on the left side of the drive.



Mount the Modbus Plus Option Card on the drive.

 Align the 2CN connector on the back of the Modbus Plus Option Card

with its mating 2CN connector on the front of the drive control card.

 Align the three standoffs on the front of the drive control board with

the three holes on the right side of the Modbus Plus Option Card.

 Press the Modbus Plus Option Card firmly onto the drive 2CN

connector and standoffs until the 2CN connector is fully seated and the

drive standoffs have locked into their appropriate holes.

 For the F7, G7, and P7 drives, connect a ground wire from the ground

terminal on the Modbus Plus Option Card to a ground terminal on the

terminal assembly.

 For the G5 drive, connect a ground wire from the ground terminal on

the Modbus Plus Option Card to terminal 12 on the drive’s terminal

strip.

1 2 3 4

Plus Option Kit 1

Résumé du contenu

Page 1 - Plus Option Kit

Yaskawa Electric America, Inc – www.yaskawa.com IG.AFD.17, Page 1 of 4 Date: 11/17/06, Rev: 06-11 Modbus® Plus Option KitCM071 This document applies

Page 2

Yaskawa Electric America, Inc – www.yaskawa.com IG.AFD.17, Page 2 of 4 Date: 11/17/06, Rev: 06-11  DIP Switch Settings  Set the Modbus Plus network

Page 3

Yaskawa Electric America, Inc – www.yaskawa.com IG.AFD.17, Page 3 of 4 Date: 11/17/06, Rev: 06-11  Remove power from the drive and wait for the charg

Page 4

Yaskawa Electric America, Inc – www.yaskawa.com IG.AFD.17, Page 4 of 4 Date: 11/17/06, Rev: 06-11 Modbus® Plus Option KitCM071Copies of this Installa

Plus de documents pour Équipement YASKAWA CM071

Voir le document Yaskawa CM071 Manuel d'utilisateur

Yaskawa CM071 Manuel d'utilisateur (7 pages)

Commentaires sur ces manuels

Pas de commentaire

Yaskawa CM071 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Yaskawa CM071. Yaskawa CM071 User Manual Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Équipement YASKAWA CM071

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Yaskawa CM071