Yaskawa CM067 Manuel d'utilisateur télécharger pdf

Yaskawa Electric America, Inc – www.drives.com

IG.V7.12, Page 1 of 4

Date: 07/01/04, Rev: 04-07

PROFIBUS-DP

Option Card

CM067



Unpack the V7 PROFIBUS-DP Option and verify that all components are present and undamaged.

Part Qty.

V7 PROFIBUS-DP Option Card Ring Kit 1

Mounting Bracket 1

M3×8 Screw 1

6” Ground Wire (150mm) 1

8.5” Ground Wire (220mm) 1

12.5” Ground Wire (320mm) 1

Installation Guide (IG.V7.12) 1



Connect power to the drive and verify that the drive functions correctly. This includes running the

drive from the operator keypad. Refer to the V7 Technical Manual, TM.V7.01, for information on

connecting and operating the drive.



Remove power from the drive and wait for the charge lamp to be completely extinguished. Wait at

least five additional minutes for the drive to be completely discharged. Measure the DC BUS

voltage and verify that it is at a safe level.

Align hole in

mounting bracket

with nib on front of

the V7 drive

Secure mounting

bracket to V7 drive

with M3x8 screw

Remove the CN2

protective cover by

carefully clipping

the three tabs

Option

mounting

bracket

CN2 Cover



Prepare the drive for the V7 PROFIBUS-DP Option.

 Remove the V7 operator keypad and terminal cover.

 Remove the plastic protective cover from over the CN2 connector and install

the option mounting bracket provided on to the drive.



Connect the ground wire provided to the ground connector on the back of the V7

PROFIBUS-DP Option.



Mount the V7 PROFIBUS-DP Option onto the drive

 Align the CN1 connector on the back of the option with its mating CN2

connector on the front of the drive.

 Simultaneously align the CN3 connector, the male RJ45 connector, on the back

of the option with the CN1 connector, the female RJ45 connector, on the front

of the drive.

 Align the tabs on the option with their corresponding slots on the front of the

drive.

 Press the option and the drive together until the tabs lock into their associated

slots.

 Secure the option to the V7 drive by tightening the locking screw at the top-

center of the option.

 Connect the ground wire from the V7 PROFIBUS-DP Option to ground terminal

on the V7 drive.

 Reinstall the operator keypad and all drive covers.

CN1 - CN2

Tab

CN3 - Male RJ45

Connector

CN1 - Female

RJ45 Connector

Slot

Tab

Slot

Ground Terminal

Ground Wire

Indicator

LEDs

Profibus Cable

Connector

Termination Switch

S2 S1

Node Address

Switches

CN1 - Modular Plug

RJ45 Female

CN3 - Modular Plug

RJ45 Male

Ground Wire Connection

CN1

Connector

PWR

COMM

ERR

Front

Back

Mounting Bracket

Ground Wires

12.5" (320mm)

8.5" (220mm)

6" (150mm)

M3x8 Screw

Locking Screw

1 2 3 4

Résumé du contenu

Page 1 - Option Card

Yaskawa Electric America, Inc – www.drives.com IG.V7.12, Page 1 of 4 Date: 07/01/04, Rev: 04-07 PROFIBUS-DP® Option CardCM067 Unpack the V7 PROFIBUS

Page 2 - Date: 07/01/04, Rev: 04-07

Yaskawa Electric America, Inc – www.drives.com IG.V7.12, Page 2 of 4 Date: 07/01/04, Rev: 04-07  Connect the V7 to the PROFIBUS-DP communication netw

Page 3 - IG.V7.12, Page 3 of 4

Yaskawa Electric America, Inc – www.drives.com IG.V7.12, Page 3 of 4 Date: 07/01/04, Rev: 04-07  Remove power from the drive and wait for the charge

Page 4

Yaskawa Electric America, Inc – www.drives.com IG.V7.12, Page 4 of 4 Date: 07/01/04, Rev: 04-07 PROFIBUS-DP® Option CardCM067 Copies of t

Commentaires sur ces manuels

Pas de commentaire

Yaskawa CM067 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Yaskawa CM067. Yaskawa CM067 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Yaskawa CM067