Yaskawa DeviceNet with ADR Option Kit CM012 Manuel d'utilisateur télécharger pdf

DeviceNet™ With ADR Option Kit

CM012

Yaskawa Electric America, Inc. – www.yaskawa.com

IG.AFD.16, Page 1 of 7

Date: 06/15/2007 Rev: 07-06

Applicable products: F7U, G7U, P7U, G5M (Spec F), and G5M (600V)

drives. For G5U (HHP) drives, refer to IG.G5HHP.16.

1. Unpack the DeviceNet Option Kit CM012 and verify that all components

are present and undamaged.

2. Connect power to the Yaskawa AC drive and verify that the drive

functions correctly.

This includes running the drive from the operator keypad. Refer to the

appropriate drive technical manual for information on connecting and

operating the drive.

3. Remove power from the drive and wait for the charge lamp to be

completely extinguished.

Wait at least five additional minutes for the drive to be completely

discharged. Measure the DC bus voltage and verify that it is at a safe level.

4. Remove the operator keypad and drive cover.

a. Remove the operator keypad.

b. Remove the terminal and control covers.

c. Remove the option card hold-down plug by carefully compressing the

top and bottom until it becomes free of its holder. Lift it out.

5. Mount the DeviceNet Option Card.

a. Remove the DeviceNet connector and attach the DeviceNet network

cable as shown below.

b. Reconnect the DeviceNet connector to the Option Card.

c. Align the J2 connector on the back of the DeviceNet Option Card to its

mating 2CN connector on the front of the drive control board.

d. Align the two stand-offs on the front of the drive control board with the

two holes on the right side of the DeviceNet Option Card.

e. Press the DeviceNet Option Card firmly onto the drive 2CN connector

and stand-offs until the J2 connector is fully seated on 2CN and the drive

stand-offs have locked into their appropriate holes.

f. Route the DeviceNet network cable along the left inside of the drive

enclosure.

g. Replace the Option Card hold-down plug.

Note: Do not ground the DeviceNet Option Card (UTC000180).

DeviceNet Option Kit CM012 Parts Qty.

DeviceNet Option Card (UTC000180) 1

Installation Guide (IG.AFD.16) 1

WARNING

Dangerous voltages in excess of 400VDC (230V drives) or 800VDC

(460V drives) are present at the DC bus terminals of the drive.

Option card

hold-down plug

1 2 3 4 5 6 7

Résumé du contenu

Page 1 - Date: 06/15/2007 Rev: 07-06

DeviceNet™ With ADR Option KitCM012Yaskawa Electric America, Inc. – www.yaskawa.comIG.AFD.16, Page 1 of 7Date: 06/15/2007 Rev: 07-06Applicable product

Page 2 - IG.AFD.16, Page 2 of 7

Yaskawa Electric America, Inc. – www.yaskawa.comIG.AFD.16, Page 2 of 7Date: 06/15/2007 Rev: 07-06DeviceNet™ With ADR Option KitCM0126. DeviceNet Netwo

Page 3 - IG.AFD.16, Page 3 of 7

Yaskawa Electric America, Inc. – www.yaskawa.comIG.AFD.16, Page 3 of 7Date: 06/15/2007 Rev: 07-06DeviceNet™ With ADR Option KitCM01210. LED Status11.

Page 4 - IG.AFD.16, Page 4 of 7

Yaskawa Electric America, Inc. – www.yaskawa.comIG.AFD.16, Page 4 of 7Date: 06/15/2007 Rev: 07-06DeviceNet™ With ADR Option KitCM01213. Yaskawa Suppor

Page 5 - IG.AFD.16, Page 5 of 7

Yaskawa Electric America, Inc. – www.yaskawa.comIG.AFD.16, Page 5 of 7Date: 06/15/2007 Rev: 07-06DeviceNet™ With ADR Option KitCM01214. Supported Outp

Page 6 - IG.AFD.16, Page 6 of 7

Yaskawa Electric America, Inc. – www.yaskawa.comIG.AFD.16, Page 6 of 7Date: 06/15/2007 Rev: 07-06DeviceNet™ With ADR Option KitCM012Instance Byte Bit

Page 7 - IG.AFD.16, Page 7 of 7

DeviceNet™ With ADR Option KitCM012Yaskawa Electric America, Inc. – www.yaskawa.comIG.AFD.16, Page 7 of 7Date: 06/15/2007 Rev: 07-06Data subject to ch

Commentaires sur ces manuels

Pas de commentaire

Yaskawa DeviceNet with ADR Option Kit CM012 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Yaskawa DeviceNet with ADR Option Kit CM012. Yaskawa DeviceNet with ADR Option Kit CM012 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Yaskawa DeviceNet with ADR Option Kit CM012