YASKAWA CDBR Spécifications télécharger pdf (Page 9)

2 Mechanical Installation

YASKAWA Europe TOEP C710616 88A - AC Drive A1000 IP23/54 Floor Standing - Quick Start Guide EN 9

2 Mechanical Installation

 Upon Receipt

Perform the following tasks after receiving the drive:

• Inspect the drive for damage. If the drive appears damaged upon receipt, contact your supplier.

• Verify receipt of the correct model by checking the information on the nameplate. If you have received the wrong

model, contact your supplier.

 Installation Environment

For optimum performance life of the drive, install the drive in an environment that meets the conditions listed below.

 Installation Orientation and Spacing

Always install the drive in an upright position. Leave enough space in the area of air inlets and outlets.

Environment Conditions

Installation Area Indoors on a flat solid floor.

Ambient Temperature

-10 °C to +40 °C

Drive reliability improves in environments without wide temperature fluctuations.

Humidity

95% RH or less non-condensing

Storage Temperature

-20 °C to +60 °C

Surrounding Area

Install the drive in an area free from:

• oil mist and dust

• metal shavings, oil, water or other foreign materials

• radioactive materials

• combustible materials (e.g., wood)

• harmful gases and liquids

• excessive vibration

• chlorides

• direct sunlight

Altitude

1000 m, up to 4000 m with derating (for details, refer to the Technical Manual)

Vibration

2 to 150 Hz at 2 m/s

Orientation Install the drive upright only.

Air

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

Pas de commentaire

YASKAWA CDBR Spécifications Page 9