YASKAWA Inverter Manuel d'utilisateur télécharger pdf (Page 72)

Digital Operator 3 - 3

Digital Operator Keys

The names and functions of the Digital Operator Keys are described in Table 3.1.

Table 3.1 Digital Operator Keys

Key Name Function

LOCAL / REMOTE

• Switches between operation via the Digital Operator (LOCAL) and the settings in

parameter b1-01 (Frequency Reference Selection) and b1-02 (Run Command

Selection) (REMOTE).

• This key can be enabled or disabled by the setting in parameter o2-01.

• The Drive must be in a stopped condition before it can be transferred to “LOCAL”

or “REMOTE” mode.

•

Scrolls through the five main menus:

• Operation (-DRIVE-), Quick Setting (-QUICK-), Programming (-ADV-),

Modified Constants (-VERIFY-), and Auto-Tuning (-A.TUNE-).

ESCAPE

• Returns to the previous display, before the DATA/ENTER key was

pressed.

JOG

• Enables jog operation when the Drive is being operated from the Digital

Operator (LOCAL).

FWD / REV

• Selects the rotation direction of the motor when the Drive is being operated

from the Digital Operator (LOCAL).

INCREASE

•

Increases parameter numbers and set values.

• Used to move to the next item or data value.

DECREASE

•

Decreases parameter numbers and set values.

• Used to move to the previous item or data value.

SHIFT / RESET

•

Selects the digit to be changed. The selected digit will blink.

• Also resets the Drive when a fault has occurred. The run command must be

removed before the reset command will be accepted.

DATA / ENTER

•

Enter menus and parameters as well as to set values.

RUN

• Starts Drive operation when the Drive is being controlled by the Digital Operator

(LOCAL).

STOP Key

•

Stops Drive operation.

• This key can be enabled or disabled when operating from the external

terminal or communications by setting user parameter o2-02.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 254 255

Commentaires sur ces manuels

Pas de commentaire

YASKAWA Inverter Manuel d'utilisateur Page 72

Commentaires sur ces manuels