YASKAWA VS-606V7 Series Manuel d'instructions télécharger pdf (Page 162)

7. Maintenance and Inspection

161

Inverters with Width of 108 mm

1. Removal

1. Remove the front cover and

terminal cover, and then

remove the cooling fan con-

nector (CN10).

2. Press the right and left catches

on the fan cover in direction 1,

and pull the fan cover in direc-

tion 2 to remove it from the

Inverter. Pull out the wiring

from the cable lead-in hole at

the bottom of the plastic case.

3. Open the right and left sides of

the fan cover to remove the

cover from the cooling fan.

2. Mounting

1. Mount the cooling fan on the

fan cover. The arrow mark to

indicate the airflow direction

must be opposite to the cover.

2. Mount the fan cover on the

Inverter. Always mount the

right and left catches on the

fan cover on the heatsinks.

Thread in the wiring from the

cable lead-in hole at the bot-

tom of the plastic case to the

inside of the Inverter.

3. Connect the wiring to the

cooling fan connector (CN10)

and mount the front cover and

the terminal cover.

Cooling

Fan Wire

Airflow Direction

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 217 218

Pas de commentaire

YASKAWA VS-606V7 Series Manuel d'instructions Page 162