Yaskawa iQpump Micro Manuel d'utilisateur télécharger pdf (Page 77)

Wire Size and Torque Specifications

Select appropriate wire type and size from Table 3.11. For simpler and more reliable wiring, crimp ferrules to the wire ends.

Refer to Table 3.12 for ferrule terminal types and sizes.

Table 3.11 Wire Size and Torque Specifications (Same for All Models)

Terminal

Screw

Size

Tightening

Torque

N•m

(in-lbs)

Bare Wire Terminal Ferrule-Type Terminal

Applic. wire size

(AWG)

Recomm. mm

(AWG)

Applic. wire size

(AWG)

Recomm. mm

(AWG)

Wire Type

MA, MB, MC M3

0.5 to 0.6

(4.4 to 5.3)

Stranded: 0.25 to 1.5

(24 to 16)

Single: 0.25 to 1.5

(24 to 16)

0.75 (18)

0.25 to 1.0

(24 to 17)

0.5 (20)

Shielded line,

etc.

S1-S7, SC, RP,

+V, A1, A2, AC,

HC, H1, P1, P2,

PC, MP, AM,

AC, S+, S-, R+,

R-, IG

0.22 to 0.25

(1.9 to 2.2)

Stranded: 0.25 to 1.0

(24 to 18)

Single: 0.25 to 1.5

(24 to 16)

0.75 (18)

0.25 to 0.5

(24 to 20)

0.5 (20)

Ferrule-Type Wire Terminations

Crimp a ferrule to signal wiring to improve wiring simplicity and reliability. Use CRIMPFOX 6, a crimping tool manufactured

by PHOENIX CONTACT.

6 mm

Figure 3.20 Ferrule Dimensions

Table 3.12 Ferrule Terminal Types and Sizes

Size mm

(AWG)

Type L (mm) d1 (mm) d2 (mm) Manufacturer

0.25 (24) AI 0.25-6YE 10.5 0.8 2.0

PHOENIX CONTACT

0.34 (22) AI 0.34-6TQ 10.5 0.8 2.0

0.5 (20) AI 0.5-6WH 12 1.1 2.5

0.75 (18) AI 0.75-6GY 12 1.3 2.8

1.0 AI 1-6RD 12 1.5 3.0

Wiring the Control Circuit Terminal

This section describes the proper procedures and preparations for wiring the control terminals.

WARNING! Electrical Shock Hazard. Do not remove covers or touch the circuit boards while the power is on. Failure to comply could result

in death or serious injury.

NOTICE: Separate control circuit wiring from main circuit wiring (terminals R/L1, S/L2, T/L3, B1, B2, U/T1, V/T2, W/T3,

⊖

⊕

2) and

other high-power lines. Improper wiring practices could result in drive malfunction due to electrical interference.

NOTICE: Separate wiring for digital output terminals MA, MB and MC from wiring to other control circuit lines. Improper wiring practices

could result in drive or equipment malfunction or nuisance trips.

NOTICE: Use a class 2 power supply (UL standard) when connecting to the control terminals. Improper application of peripheral devices

could result in drive performance degradation due to improper power supply.

NOTICE: Insulate shields with tape or shrink tubing to prevent contact with other signal lines and equipment. Improper wiring practices could

result in drive or equipment malfunction due to short circuit.

NOTICE: Connect the shield of shielded cable to the appropriate ground terminal. Improper equipment grounding could result in drive or

equipment malfunction or nuisance trips.

Wire the control terminals using Figure 3.21 as a guide. Prepare the ends of the control circuit wiring as shown in Figure

3.22. Refer to Wire Size and Torque Specifications on page 77 for details.

3.6 Control Circuit Wiring

YASKAWA TOEP YAIQPM 03B YASKAWA AC Drive - iQpump Micro User Manual

Electrical Installation

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 299 300

Commentaires sur ces manuels

Pas de commentaire

Yaskawa iQpump Micro Manuel d'utilisateur Page 77

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Yaskawa iQpump Micro