Yaskawa DeviceNet Option Card CM05x Manuel d'utilisateur télécharger pdf (Page 62)

Diagnostics and Troubleshooting 9-3

Module Status LED

The Module Status LED is located along the left edge of the Drive DeviceNet Option Board. The Module Status

LED is labeled “MS”. This bi-color (green/red) LED indicates whether or not the device has power and is

operating properly. The following table defines the Module Status LED states.

LED state Device State Description

OFF

No Power There is no power applied to the device.

Flashing

GREEN

Device is in Standby The device needs commissioning due to missing,

incomplete, or incorrect configuration parameters.

Solid

GREEN

Device Operational The device is operating in a normal condition.

Flashing

RED

Minor Fault The device has a recoverable fault active.

Solid

RED

Unrecoverable Fault The device has an unrecoverable fault active.

Note: The flash rate for the LED is approximately 1 flash per second. The LED is ON for

approximately 0.5 seconds and OFF for approximately 0.5 seconds.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 113 114

Pas de commentaire

Yaskawa DeviceNet Option Card CM05x Manuel d'utilisateur Page 62