Yaskawa iQpump Controller Programming Manual Manuel d'utilisateur télécharger pdf (Page 134)

134 YASKAWA TM.iQp.07 iQpump Controller Programming Manual

For example, if the iQpump drive needs to display the Elapsed Timer as the Power-On monitor, then o1-01 must be set to “13” and o1-02

must be set to “4”. The next time iQpump drive power is cycled, the digital operator displays U1-13 (Elapsed Time), U1-14 (Flash ID),

and U1-15 (Term AI Level).

◆ o1-05 LCD Contrast Adjustment

Setting Range: 1, 3 or 5

Factory Default: 3

The contrast setting of the LCD display of the digital operator can be adjusted by the setting of parameter o1-05. The higher the number

programmed into o1-05, the darker the background will become. Set o1-05 to the value that makes the LCD the easiest to view at the

normal viewing distance and angle.

◆ o1-06 User Monitor Selection Mode

◆ o1-07 Second Line User Monitor

Setting Range: 1 ~ 94

Factory Default: 2

◆ o1-08 Third Line User Monitor

Setting Range: 1 ~ 94

Factory Default: 91

Normally the monitors shown directly below the active monitor are the next two sequential monitors. If o1-06 (User Monitor Selection

Mode) is set to “1: 3 Mon Selectable,” those two monitors are locked as specified by parameters o1-07 and o1-08 and will not change as

the top parameter is scrolled with the INCREASE and DECREASE keys.

Setting Description

0 3 Mon Sequential

1 3 Mon Selectable (

factory default)

Output Frequency

Output Current

-DRIVE- Rdy

Frequency Ref

U1-01= 60.00Hz

- - - - - - - - - - - - - - - - - - - - - - - - - - - - -

U1-02= 60.00Hz

U1-03= 10.05A

ctive Monito

Next two

sequential

monitors

ctive Monitor Title

-DRIVE- Rdy

Elapsed Time

U1-13= 2H

- - - - - - - - - - - - - - - - - - - - - - - - - - - - -

U1-14= 03010

U1-16= 51.2%

ctive Monito

ctive Monitor Title

Next two

sequential

monitors

Flash ID

Ter m AI Le ve l

-DRIVE- Rdy

PI Feedback

U1-24= 64.55%

- - - - - - - - - - - - - - - - - - - - - - - - - - - - -

U1-37= 0.00%

U1-38= 2.50%

ctive Monitor

o1-07

o1-08

ctive Monitor Title

PI Output

PI Setpoint

o1-07=37

o1-08=38

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 301 302

Commentaires sur ces manuels

Pas de commentaire

Yaskawa iQpump Controller Programming Manual Manuel d'utilisateur Page 134

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Yaskawa iQpump Controller Programming Manual