Yaskawa iQpump Controller Programming Manual Manuel d'utilisateur télécharger pdf (Page 204)

204 YASKAWA TM.iQp.07 iQpump Controller Programming Manual

◆ P4-15 Alternation Operation Selection <0034>

Selects the drive behavior when the internal alternation timer expires.

◆ P4-16 Alternation Time <0034>

Setting Range: 1.0 ~ 100.0 hrs

Factory Default: 24.0 hrs

Refer to parameter P4-16 in Appendix A for description details.

◆ P4-17 Dual Zone PID Feedback Bandwidth Range <0034>

Setting Range: 0 ~ 6000.0

Factory Default: 10.0

Refer to parameter P4-17 in Appendix A for description details.

◆ P4-18 Run - Stop Control Run Time <0034>

Setting Range: 0.0 ~ 6000.0 min

Factory Default: 0.0 min

The Run - Stop Control provides a method to have the drive automatically run and stop for given amounts of time for a given number of

cycles. This feature is primarily used for clearing the sediment out of new water wells.

The Timed Run feature provides a way to perform a “Tank Fill” operation with only a single “low level” switch.

Note: Refer to parameter b1-02 = 5 (Also applies to parameters P4-19 and P4-20).

Table 80 Additional Parameter

◆ P4-19 Run - Stop Control Stop Time <0034>

Setting Range: 0.0 ~ 6000.0 min

Factory Default: 0.0 min

This parameter sets the amount of time the drive will stop for when the run-stop control is enabled.

◆ P4-20 Run - Stop Control Cycles <0034>

Setting Range: 0 ~ 1000

Factory Default: 0

This parameter determines how many run-stop cycles the drive will execute before staying stopped.

Setting Description

0 Wait for Stop

1 Immediate

Parameter

No.

Addr.

Hex

Parameter Name

Digital Operator Display

Description Range Default

Location

b1-02 0181

Run Command Selection

Run Source

Selects the run command input source.

0: Operator - “Hand” and “Off” keys on digital operator

1: Terminals - Contact Closure on Terminal S1

2: Serial Com - RS-485 Terminals R+, R-, S+ and S-

3: Option PCB - Option board connected at 2CN

5: Timed Run

<0034>

0 ~ 3, 5 0 Programming

1 2 ... 199 200 201 202 203 204 205 206 207 208 209 ... 301 302

Commentaires sur ces manuels

Pas de commentaire

Yaskawa iQpump Controller Programming Manual Manuel d'utilisateur Page 204

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Yaskawa iQpump Controller Programming Manual