Yaskawa iQpump Controller Programming Manual Manuel d'utilisateur télécharger pdf (Page 48)

100

101

48 YASKAWA TM.iQp.07 iQpump Controller Programming Manual

• If b1-01 = “1: Terminals” then the analog input A1 will be used instead of Setpoint Reference 1 for the first preset Setpoint. If b1-01 =

“0: Operator,” then Setpoint Reference 1 will be used.

• If H3-09 = “2: Aux Reference” then the analog input A2 will be used instead of Setpoint Reference 2 for the second preset Setpoint. If

H3-09 = 2 then Setpoint Reference 2 will be used. This is only available when the iQpump drive is operating in the speed mode.

Important: The programming of d1-01 through d1-04 and d1-17 will be affected by the setting of P1-02 and o1-03, respectively. The

programming of these parameters will be in the units specified by Display Scaling parameter (P1-02 and o1-03).

Note: This function is only used with the LCD operation, not used with HOA operator.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 301 302

Commentaires sur ces manuels

Pas de commentaire

Yaskawa iQpump Controller Programming Manual Manuel d'utilisateur Page 48

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Yaskawa iQpump Controller Programming Manual